How To

How To Dual Boot Ubuntu 20.04 With Windows 10? [Using Bootable USB]

The upcoming Ubuntu 20.04 LTS is one of the most feature-rich and high-performance versions among the Ubuntu family. v20.04 is the next long-term support iteration that will be released on April 23, 2020.

You can read our regular updated article on v20.04 “Focal Fossa” release date and upcoming features. However, if you’re more interested in installing Ubuntu 20.04, follow the detailed five steps given below in the article.

So, let’s talk about the installation. In this article, I will guide you to dual boot Ubuntu 20.04 with Windows 10 by creating a bootable USB. This is an in-depth article, so sit back and read every step to install Ubuntu Linux alongside Windows.

One more thing I want to mention here is that the stable version of the Ubuntu is yet to be released. Hence, I’m using Ubuntu 20.04 Daily Builds. This article will be updated as soon as the final release arrives.

Dual Boot Ubuntu 20.04 And Windows 10

Follow the step-by-step instructions to download Ubuntu ISO and install using the bootable Ubuntu USB stick. Here’s a brief list of steps:

  • Create free space for installayion in Windows
  • Make a Ubuntu bootable USB on Windows
  • Install Ubuntu 20.04 with Windows 10
  • Create a partitioning scheme for Ubuntu Linux
  • Configure general settings and finish the installation

Are you ready to install? Well, without wasting any time, let’s dive into the Ubuntu installation guide —

Step 1: Create A New Partition Drive In Windows

This is a preliminary step to create a separate free space in Windows 10 for Ubuntu installation. We’ll use the pre-installed Windows disk management software to make a dedicated partition on the hard disk drive. However, you’re free to use any third-party tool.

Search in your windows for “Disk Management” and open the software with subtitle as “Create and format hard disk partitions.”


Creating a new partition in Windows 10 — Search Disk Management

Now, select the volume to extract and allocate space for installing Ubuntu. Right-click on the selected drive and choose “Shrink Volume.” Here, if you don’t have any other volume, you can also use “C drive.”


Creating A New Partition in Windows 10 — Select Volume To Create New Volume

Next, enter the space for Ubuntu OS in the prompt window. For smoother and better performance, Ubuntu always recommends at least 25GB of free space. Hence, I would also suggest you assign more than 25GB. I have a 500GB hard drive on my laptop, so I selected 100GB.


Creating A New Partition Volume in Windows 10 — Enter Partition Size

After filling in the space amount, click on “Shrink” and you’ll notice a new unallocated space created where we’ll now install Ubuntu 20.04.


Creating A New Partition In Windows 10— New Unallocated Area Created

Step 2: Create A Bootable USB On Windows

Before heading toward the Ubuntu installation, we also need to download Ubuntu ISO images and make a bootable USB from ISO. Hence, download the Ubuntu 20.04 Daily Build image from the official site here.

But to create a bootable USB on Windows 10, we require image writing software to burn Ubuntu ISO. For the same, I’m using the Balena Etcher software which you can download from here. You can also choose from the best 5 USB tools available for Windows.

I chose Etcher because it burns ISO into USB without worrying about a partition scheme or file system format. Moreover, Etcher is a cross-platform app available for Windows, macOS, and Linux.


Balena Etcher for All Platforms

If you wish, you can use command line to create a Live USB. The path choice is yours but it all leads to one destination.

Finished the download? Then, open the application and you get only three steps to make a bootable USB.


Creating a Bootable USB Using Balena Etcher On Windows 10 — Select Image

Click on the “Select image” and a Windows dialog will prompt. Go to the location where you’ve downloaded the Ubuntu ISO and select that file.


Creating a Bootable USB Using Balena Etcher On Windows 10 — Select ISO image

If your USB is already plugged in, Etcher will automatically detect your USB stick. If not, attach your USB to the system and make sure Etcher selects the right device.

You’re now one step behind in getting your live USB ready. But wait, before you start flashing, you need to delete all files and format your USB.

To do the same, right-click on the USB drive and select the FAT32 file system. Keep the settings as displayed in the picture below and start the process with a quick format.


Creating Bootable USB Using Balena Etcher On Windows 10 — Formatting Completes

As you complete the format, click on the last stage “Flashing” and etcher will start burning ISO into USB.


Creating a Bootable USB Using Balena Etcher On Windows 10 — Writing Starts

Flashing the Ubuntu image may take at least five minutes. So wait for a while until you get a Flash complete notification!


Creating a Bootable USB Using Balena Etcher On Windows 10 — Writing Completes

Step 3: Dual Boot Ubuntu 20.04 And Windows 10

If you’ve successfully created a bootable USB, you can move forward to loading Ubuntu from the live USB stick.

Restart your computer with a plugged-in USB and press the F2 or F12 to enter the boot menu. For my Dell laptop, F12 is the key for the boot menu. You must use the key specified for your system manufacturer.

Select USB storage from the boot menu in legacy mode. Your boot menu may differ based on the OEM of your PC. If you find any difficulty, read how to boot from USB in BIOS.


Choose a Bootable USB

If you hear a beep sound and see a spinning wheel with the Ubuntu logo beneath, you’re good to go.


Installing Ubuntu 20.04 LTS — Installation Starts

After a few seconds or a minute, the Ubuntu installer will start and display two options to proceed further.

Choose “Try Ubuntu” to enter the Ubuntu desktop without installing and get a sneak-peek. But we’re here to install Ubuntu permanently, so click on “Install Ubuntu”.


Installing Ubuntu — Try Or Install Ubuntu

Select the Keyboard settings as per your native language.


Installing Ubuntu — Keyboard setting

If you want to install third-party software in the upcoming step, connect to your Wi-Fi network or you can skip continuing further.


Installing Ubuntu — Connect To Wi-Fi Network

The next window gives options to choose the method of the software installation. If you have memory constraints, choose a minimal installation to pre-install a few software.

But if you want to preload various applications such as games, office, and browsers, choose the normal installation.

Also, make sure to check both other options to download updates and install third-party software during installation.


Installing Ubuntu — Software Installation

The above process may take some time to load. As soon as it is finished, you now enter into the important window where you need to be very cautious.

Since we want to dual boot Ubuntu and Windows 10, choose “something else” to create a partition table manually.

Though you can also select “Install Ubuntu alongside Windows 10,” I would not advise you to do so because “Something else” gives more control to manage the space for each partition.


Installing Ubuntu — Choose Installation Type

Step 4: Creating A Partitioning Scheme For Ubuntu

Partition schemes for Ubuntu can be a confusing part for beginners as it follows a different approach than Windows — that’s why I’ve created a dedicated step for the same.

As you continue, you will notice the NTFS type device that belongs to your installed Windows OS. If you want to keep Windows running alongside Ubuntu, don’t touch any NTFS type device until you know how partition works.


Disk Partition Table

Moving forward, we will create three partitions for Ubuntu — /root, /home and /swap. You can also create other partitions like /mnt. But these three are the most important that are required for Ubuntu installation.

Select the free space option and click on the “+” to add a new partition. Then, fill out the input field with values as displayed in the picture below.

I also want to clarify that for each partition, I’ve chosen a standard size. You’re completely free to change the partition size based on the space you’ve allocated for Ubuntu.


Create Root Partition

Again, select the free space and create a swap area that acts as a virtual RAM memory. I gave 30GB of space for the swap area based on my 100GB total space for Ubuntu. The least space you can allocate for swap must not be less than your system RAM size.


Create Swap Area

Lastly, create a home partition which will be your personal directory to store files and folders. The picture may look hazy, hence, I’m listing the values:

  • Size: 32417MB
  • Partition Type: Logical
  • Location: Beginning
  • Use as: Ext4 journaling file system
  • Mount Point: /home

Create a Home Partition

Finally, we’re done with the partition table. Wait, do you want to modify or resize the partition? If yes, click on “—” to drop the misconfigured partition and use “+” to initiate again.


Final Partition Table

Take a closer look over the final configuration and click on “install now” to start writing changes to disks.


Write Changes To Disks

Step 5: Configure Settings And Finish The Installation

We’ve now reached the final step and we only need to set up our basic configuration for Ubuntu OS. So, let’s finish it.

In the second last window, set your location using a map or dropdown field. Luckily, if you’re connected to the internet, the Ubuntu installer will automatically detect and set your location.


Ubuntu 20.04 LTS Installer — Set Location

At last, set up your username and password that you’ll use to login to the system. Always choose a strong password with alphanumerics and symbols.


Ubuntu 20.04 LTS Installer — Set Username Password

Click on continue and the installation process starts. It may take around five minutes until you can look over the slideshow displaying all software tools and applications.


Installation Starts

When the installation is finished, restart your system. The moment your system reboots, you’ll be directed to a bootloader with multiple options to boot with your installed OS.

Since we have dual boot Ubuntu 20.04 and Windows 10, you have two main options. The rest is just a testing menu which you can ignore.


Dual Boot Ubuntu 20.04 and Windows 10 Options in Grub

Now select Ubuntu and log in with the credentials you set in the last step.


Ubuntu 20.04 Desktop

Enjoy Ubuntu 20.04 LTS with Windows 10!!!

To Top

Pin It on Pinterest

Share This